Shandong Yushun Industrial and Mining Equipment Co

Environmentally friendly self-priming pumps directly supplied to Jiekai pumps can be customized and produced in batches
Special instructions
Because the pump configuration and related accessories are different, the prices are different, and unified pricing cannot be done. The prices shown here are not actual prices. , please contact our sales staff for the actual price. If you need to produce or place an order, please contact us first to confirm whether it is in stock, and communicate in advance to determine the delivery date. Thank you for understanding!
Starting and operating the environmentally friendly self-priming pump
When operating the self-priming pump, pay attention to whether the direction of the pump shaft is correct.
Pay attention to whether there are any abnormal sounds and vibrations during rotation.
Pay attention to the readings of the pressure gauge and vacuum gauge. After starting, when the readings of the pressure gauge and vacuum gauge fluctuate for a period of time and become stable, it means that the pump has been filled with liquid and the pump has entered normal infusion operation.
Before the pump enters normal infusion operation, that is, during the self-priming process, special attention should be paid to the rise in water temperature in the pump. If this process is too long and the water temperature in the pump is too high, stop the pump to check the cause.
If the temperature of the liquid in the pump is too high and causes difficulty in self-priming, you can temporarily stop the machine and use the liquid in the discharge pipe to flow back into the pump or add a liquid storage port to the pump body to directly replenish liquid into the pump. , cool down the liquid in the pump, and then start it.
If the pump produces strong vibration and noise during operation, it may be caused by cavitation in the pump. There are two reasons for cavitation: one is that the flow rate in the inlet pipe is too high, and the other is that the suction lift is too high . When the flow rate is too high, the outlet control valve can be adjusted to increase the pressure gauge reading. When the inlet pipeline is blocked, it should be eliminated in time. If the suction lift is too high, the installation height of the pump can be appropriately reduced.
If the pump stops for some reason during operation and needs to be restarted, the outlet control valve should be slightly opened (not fully closed). This will not only facilitate the discharge of gas from the outlet during the self-priming process, but also ensure that the pump Start under lighter load.
Pay attention to check whether there is any leakage in the piping system.
Jiekai Pump Industry specializes in the production and sales of environmentally friendly self-priming pumps and various acid and alkali-resistant and corrosion-resistant pumps. Independent mold development and injection molding, combined with foreign advanced technology, strictly control product quality. The entire process from ordering, development, manufacturing, inspection, sales, and service is controlled in accordance with the requirements of the quality system. If you have any questions about the product, you can call our company directly.
Environmentally friendly self-priming pump sales and service center
Telephone
Mobile phone: (Manager Yu)
Address: Second Industrial Zone, Wanjiang Gonglian Community, Dongguan City, Guangdong Province
= ================================================== =======================================
After-sales service commitment:
The quality guarantee period of our company's products is: one month from the date of shipment.
During the quality guarantee period, if there is a failure caused by manufacturing quality, our company will be responsible for free maintenance services.
Upon receipt of the complaint information, the company will contact the customer within hours and provide handling suggestions.
For on-site services that are not caused by our company's manufacturing quality, our company will charge technical service fees to customers based on actual travel and other expenses as appropriate.
Our company provides paid maintenance services for damage caused by non-our manufacturing quality issues or damage outside the warranty period.